Language: EN | 中文 | BM |

Share:


Teflon Spray - Spanjaard Malaysia

TEFLON SPRAY

Spanjaard CDF (Clear Dry Film)
is a dry lubricant consisting of a dispersion of very fine particles of PTFE in a superior, air-drying resin. The dried coating is non-toxic and non-staining.

Application
For use in a low load-carrying application where use of a conventional wet lubricant is undesirable (for high rubbing pressures use Spanjaard ADF with MoS2).
Spanjaard CDF provides dry lubrication in dusty conditions and is ideal for the food, paper, plastics, textile and wood industries.

The Spanjaard CDF is totally resistant to water, most chemicals and solvents. It displays good release and anti-stick properties.
The opaque white Spanjaard CDF film is also excellent as a curtain rail and drawer roller lubricant. It also provides a protective coating resistant to nearly all acids (including nitric acid) and alkali.

Release agent in the moulding of polycarbonates (e.g. telephone casings).

The film will completely cure at ambient temperature within 24 hours and will give excellent adhesion on a prepared surface.

Typical Properties
TYPICAL PROPERTIES SPANJAARD CDF
Colour Opaque white
Density,g/cm3 1.40g/ml
Operating temperature, °C -20 to 270


Contact our sales consultant in area: 
Malaysia, Selangor (Klang, Puchong, Shah Alam, Subang), Kuala Lumpur (Sungai Buloh), Negeri Sembilan (Seremban), Melaka, Johor (Johor Bharu, Muar, Batu Pahat), Pahang (Temerloh, Kuantan), Kelantan (Kota Bahru), Terengganu (Kuala Terengganu), Perak (Ipoh), Kedah (Sungai Petani), Perlis, Penang (Bukit Mertajam, Butterworth, Seberang Prai), Sabah (Kota Kinabalu), Sarawak (Kuching), WP Putrajaya, WP Labuan, Indonesia, Singapore, Thailand, Philippines, Vietnam, Laos, Myanmar, Cambodia, Brunei 

Specifications

Sorry, currently do not have any product specifications

Teflon Spray